Gas Interface - BOCI BLT6102H Product Manual

Gas interface

2.
Connect the cutting gas pipe to the cooling gas pipe of the nozzle and tighten it with
a wrench.
Note: When using
φ 12 air pipe, the
air pipe interface
of φ 12 in the
fitting box needs to
be replaced.
Cutting
Interface
Note: When using
φ12 air pipe, the
air pipe interface
of φ12 in the
fitting box needs to
be replaced.
tallation connection: cutting gas 1,
Ins
nozzle cooling gas 2
Notice:
The maximum pressure of cutting gas is 25bar (2.5Mpa).

The cutting gas quality shall meet the requirements of gas quality in accordance with ISO

8573-1:2010: solid particles - class 2, water - class 4, oil - class 3. The purer the cutting gas,
the longer the life of the protective lens.
The cutting gas pipe diameter (outer diameter) is 10mm, and the nozzle cooling gas pipe

diameter (outer diameter) is 8mm.
BLT6102H Product Manual
Gas
Nozzle
Gas
Cooling
7