Specifications Of The Colposcope - Henry Schein COLPOSCOPE II User Manual

C) Look through the right eyepiece; rotate the eyetube (Fig. 24) until the image is
precisely in focus (the diopter is now properly set). Do the same for the left
eyepiece to set the diopter.
D) Bring the zoom to the highest power (4.5X) again. If the image is not in sharp
focus, use the focusing knob on the focusing mount to bring the specimen in
focus. The image should remain sharp throughout the entire zoom range.

SPECIFICATIONS OF THE COLPOSCOPE

 Ratio of zoom head magnification is 1:6.7 (0.67X-4.5X).
 Eyepieces: Standard WF20X/11.5mm. Optional WFH10X/22mm, WF15X/16mm.
 Objective Lens 0.3X (standard).
 Working distance: 298mm.
 Magnification: 3.9X-27X (with 0.3X objective and WF20X eyepiece).
 Inclination of binocular tube: 45°-90°adjustable.
 Adjustment of interpupillary: 55mm-75mm.
 Dimensions:
Overall height: 63" (1600mm)
Overall weight: 77.1bs/35kgs (stand 69.1bs/31.5kgs, head 8.1bs/3.5kgs)
Center of column to the end of leg: 16-1/2" (420mm)
The horizontal distance from the center of column to the mount of the zoom body is 30"
(780mm)
Height of microscope: 63" (1600mm)
Fig. 23
Fig. 24
11