Choose Your Connection; Usb Connection - Epson WorkForce 40 Series Quick Manual

5

Choose your connection

Network (wireless or wired)
See your Network Installation
You can't install your software as
described below.
OR

USB connection

Make sure you have a USB cable (not included).
Then follow the steps below.
USB connection
Follow these steps to connect the WorkForce 40 Series directly to your
computer using a USB cable (not included).
Windows
1
Make sure the printer is NOT CONNECTED to
your computer.
Note:
If you see a Found New Hardware screen,
click Cancel and disconnect the USB cable. You
can't install your software that way.
2
Insert the WorkForce 40 Series software CD.
With Windows Vista, if you see the AutoPlay
window, click Run EPSETUP.EXE. When
you see the User Account Control screen,
click Continue.
3
Click Install and follow the
on-screen instructions.
4
When you see this screen, select
Install driver for direct USB
connection and then click Next.
5
When prompted, connect a USB cable. Use any open USB port on
your computer.
Guide.