SMART SITE™ TIME CLOCK & DOCUMENT STAMP
SMART SITE™ TIME CLOCK & DOCUMENT STAMP
Model 3500ss/3600ss/3700ss
Model 3500ss/3600ss/3700HDss
PRINTING MODES
The 3500ss/3600ss/3700HDss can be set to print automatically or manually using the SET
MODE feature. When set to AUTO the clock will print whenever the actuator is activated.
When set to MANUAL, the clock will only print when the "manual button" located in the
left, top corner above the display screen is pressed.
Manual Button
ADJUSTING DOCUMENT EDGE
The actuator can be adjusted to accommodate different document widths.
1
Disconnect power plug before adjustment
Place clock on its side so the viewing window is facing towards you.
2
3
Locate the "actuator adjustment knob" on the bottom of the clock.
Push "actuator adjustment knob" in while sliding the actuator back or forth to
4
adjust position.
PRINTING MODES & ADJUSTING DOCUMENT EDGE
Actuator
DISCONNECT POWER PLUG
BEFORE ADJUSTMENT
9