Download Print this page

shelta SAVANNAH Assembly And Use Instructions

Cantilever umbrella

Advertisement

Quick Links

Operating Instructions
1.
Opening. Turn the crank handle (a) clockwise, the umbrella will open. When
cranking, if you feel pressure and the umbrella is not opening, spread the um-
brella ribs using your hands, then continue to crank open.
2.
Tilting. When you want to change the angle of your umbrella (Tilt), squeeze
the Tilt handle trigger (b) and move it up or down until you reach the angle
that you desire. The tilt angle can be locked into any of 5 tilt lock holes in the
mast track.
3.
Closing. When closing umbrella squeeze Tilt handle trigger and pull Down
towards bottom of mast, at same time turn crank handle anti-clockwise to
close the umbrella. Use fabric tie to secure umbrella frame to mast.
4.
Rotating. The umbrella will rotate 360 degrees by simply stepping on the
base pedal (see diagram c); rotate the main frame by hand. When the um-
brella reaches the position desired, release the foot pedal and the umbrella
will lock into place.
5.
LED Light Attachment. Attaching optional Shelta LED "Flying Saucer" light
(available at your Shelta retailer) is easy. Rotate the light attach bracket on
underside of umbrella Hub (h) in either direction to cause it to drop down. The
opened LED light is attached to this, then clicked closed. Battery life is at least
60 hours.
SAVANNAH CANTILEVER UMBRELLA
ASSEMBLY AND USE INSTRUCTIONS
Phone: 61 2 8863 0400
Fax: 61 2 9636 4719
Unit 4 / 1 Foundation Place
Prospect NSW 2148

Advertisement

loading
Need help?

Need help?

Do you have a question about the SAVANNAH and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for shelta SAVANNAH

  • Page 1 LED Light Attachment. Attaching optional Shelta LED “Flying Saucer” light (available at your Shelta retailer) is easy. Rotate the light attach bracket on ASSEMBLY AND USE INSTRUCTIONS underside of umbrella Hub (h) in either direction to cause it to drop down. The opened LED light is attached to this, then clicked closed.
  • Page 2 Savannah Assembly Instructions Savannah Components MOUNTING OPTIONS After taking umbrella out of the carton, please make sure that you inspect the included components. Option A - Using Ballast Block frame plus separately purchased Concrete ballast blocks. This option is appropriate for installation on...