Install Software - Epson Stylus Photo R1900 Start Here Manual

5

Install software

Your software works with Windows
and Windows Vista,
Windows
1
Make sure the printer is NOT CONNECTED
to your computer.
Note: If you see a Found New
Hardware screen, click Cancel and
disconnect the USB cable. You
can't install your software that way.
2
Insert the Software CD.
With Windows Vista, if you see the AutoPlay
window, click Run Epsetup.exe. When you
see the User Account Control screen, click
Continue.
3
Click Install and follow the on-screen instructions.
4
When you see this screen, click the first option and click Next,
unless the printer is connected to your computer through an external
print server.
If you're using an external print server, click the second option, click
Next, and skip to step 6.
5
When prompted, connect the USB cable to any open port on
your computer and then to one of your printer's USB ports.
Note: If installation doesn't continue after a moment, make sure the
printer is securely connected and turned on.
6
Follow the on-screen instructions to install the rest of the software.
7
When you're done, remove the CD.
You're ready to print!
®
® and Macintosh
2000, XP, XP Professional x64 Edition,
® OS X 10.3.9 to 10.4.x.