Maintenance And Storage - FujiFilm MARINER 7X50 WP-XL Instruction Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 12

Maintenance and Storage

Cleaning the Lenses
Dirt and fi ngerprints on the surface of the lenses diminish visibility considerably,
and, in the event that they are "baked on" by sunlight and left for days without
treatment, can become permanent. When the lenses are soiled, remove dust with
a soft, dry brush, and wipe dirt and fi ngerprints off with a small amount of alco-
hol soaked into a soft, clean cloth. Wipe using a circular motion, from the center
outwards.
Cleaning the Body
If the outer surface of the binocular becomes soiled or wet, wipe with a dry cloth,
be sure the binoculars are completely dry before replacing them in the case. When
the binoculars are used in a salt-air/ocean environment, they should be rinsed in
fresh water before being stowed away.
Storage
The binocular can be used in temperatures between -20 °C and +50 °C. However,
never leave the binocular in particularly hot or cold places, such as cars, summer
or winter. When not using the binocular for any considerable length of time, store
it in a cool dry place.
Other Precautions for Use
Do not store in a location with drastic temperature irregularities.
• Store in a well ventilated location, avoiding high temperature & high moisture
locations.
• Do not store near an electronic device that heats up. It may cause the product
to fail.
• Remove dirt and dust from the lens with a low powered air compression de-
vice, and wipe gently with a cleaning cloth.
ENGLISH
EN-12

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mariner 7x50 wpc-xl

Table of Contents