Product View Main Function Teison AC EV Charging Station is an electric car charging equipment. Its Supporting button or key to start/stop charging, LCD screen Display Shows appearance is shown in Figure 1. The product meets the requirements of IEC information such as charging status, charging current, voltage, Kwh and 61851-1:2017 AC charging system.
Installation Instructions 1.3 Reference Standard Standard No. Statement 2.1 Safety Tip Electric vehicle conductive charging system – Part 1: IEC 61851-1:2017 General requirements The people who assemble and use the EV charger must response the follow Plugs, socket-outlets, vehicle connectors and vehicle principle and rule, to confirm the relevant people and device operation normally: inlets –Conductive charging of electric vehicles –...
Charging Instruction Pedestal installation dimension 3.1 . After Connect with the power, the wall box starts to be energized, the blue light is always on, and the screen will display the gear and status. 3.2 . Connect the vehicle and insert the plug into the vehicle socket. The control panel will automatically detect the connection status of the vehicle.
Page 7
4.2 Breakdown and Maintenance LCD display instruction Statu Status Displ Conditi indicat Solution indica Status of Standby display code light light Leakag The red light flashes once at 1.5S 0x000 Creepa interval, indicating that it is a leakage flash fault. Please cut off the power supply Protecti Status of Connecting and check the charging facilities...
Page 8
85 protecti ature Teison New Energy company, ensure the production lines of EV Charging are degrees, please pull out the charging plug after a period of time and try through strict quality inspection, within two years from the date of purchase charging again.
Page 9
Warranty card Information register Product name Model Warranty date User name Contact phone Mail address Dealers shop Email address...
Need help?
Do you have a question about the TS-EVC07-001 (S) and is the answer not in the manual?
Questions and answers