Connect Fax Line; Load Paper In Cassette - Epson WorkForce Pro WP-4533 Series Quick Setup Instructions

Note: The included cartridges prime the printer and print about
1000 black pages/900 color pages. Actual page count will vary.
Caution: Don't turn off the printer or open the cover while it is
priming or you'll waste ink.
6
When you see this menu on your product's LCD screen,
do not press the OK button yet. Continue with the
instructions in the following sections to load paper in
your product and install software.
5
Load paper in the cassette
You can load letter-, A4-, or legal-size plain paper in the
cassette. For instructions on loading envelopes and special
paper in the rear MP tray, see the online User's Guide.
1
Pull out the paper cassette.
2
Slide the edge guides outward, and position them for the
type of paper you are using.
Note: If loading legal-size paper, extend the cassette as shown.
3
Insert the paper with the printable side facedown.
Note: Make sure the paper is loaded against the edge guide
and not sticking out from the end of the cassette.
4
Slide the edge guides against the paper, but not too
tight. Make sure the paper is under the tabs on the edge
guides.
5
Gently insert the paper cassette at the bottom of the
printer.
Note: The paper may slide forward slightly as you insert the
cassette. This is normal.
6
Extend the output tray and raise the paper stopper as
shown. (Do not raise the paper stopper for legal-size
paper.)
6
Connect the fax line
To fax, connect the included phone cord to a telephone wall
jack and to the LINE port on the back of your product. To
connect a telephone or answering machine, use the EXT. port
on your product. See the online User's Guide for more details.
Note: If you're connecting to a DSL phone line, you must use a DSL
filter or you won't be able to fax. Contact your DSL provider for the
necessary filter.