Table of Contents
Advertisement
SuperMassive_9800_GSG.book Page 37 Tuesday, September 9, 2014 7:32 PM
NAT policies allow the flexibility to control Network Address
Translation based on matching combinations of Source IP
address, Destination IP address, and Destination Services.
Policy-based NAT allows you to deploy different types of NAT
simultaneously.
For configuration procedures and information regarding the
different types of NAT policies, such as Many-to-One, One-to-
One, or One-to-Many Load Balancing, refer to the SonicOS
Administrator's Guide.
Configuring a Stateful HA Pair
This section provides instructions for configuring a pair of Dell
SonicWALL SuperMassive 9800 appliances for Stateful High
Availability (HA). This section is relevant to administrators
following deployment Scenario B.
A Stateful HA pair operates in NAT mode by default, similar to
Scenario A, with the added benefit of high availability.
See the following sections:
•
Initial High Availability Setup, page 38
•
•
Configuring HA Monitoring Settings, page 39
•
Configuring Optional HA Settings, page 40
•
Configuring HA Advanced Settings, page 41
•
HA License Configuration Overview, page 41
•
Completing HA Pair Association, page 42
•
Verifying High Availability Setup, page 42
37
Advertisement
Table of Contents
