Table of Contents
Advertisement
SuperMassive_9800_GSG.book Page 25 Tuesday, September 9, 2014 7:32 PM
Registration Overview
Although there are several ways to register your new
Dell SonicWALL appliance, Dell SonicWALL recommends
registering your appliance through the SonicOS web-based
management interface.
This section describes how to register and license your
appliance through SonicOS, as well as the alternate options
available on MySonicWALL.
Note: If you haven't created a MySonicWALL account, see
Creating a MySonicWALL Account, page
Registering in SonicOS
After you have completed the Setup Wizard and can
successfully connect to your Dell SonicWALL SuperMassive
9800 appliance, you are ready to register it.
1.
Log into your Dell SonicWALL appliance. Use the defaults:
<http://10.10.10.10> and admin / password, or if you
changed these fields during the initial setup process, use
the new IP address and credentials. Then, click Login.
2.
Navigate to the System > Status page.
A message displays at the top of the screen that your
Dell SonicWALL appliance is not registered. Click the
Register link.
24.
3.
Enter your MySonicWALL username and password in the
appropriate fields. Then, click Submit.
4.
In the Licenses > License Management page, specify a
Friendly Name for the Dell SonicWALL appliance.
5.
Complete the Product Survey and then click Submit.
6.
Click Continue in the registration completion notification
window.
The Licenses > License Management page now lists all
the Security Services associated to your appliance.
Registration Overview |
25
Advertisement
Table of Contents
