Table of Contents
Advertisement
SuperMassive_9800_GSG.book Page 18 Tuesday, September 9, 2014 7:32 PM
2.
Launch the Dell SonicWALL Setup Wizard by clicking the
first Here link. This wizard helps you quickly configure the
Dell SonicWALL appliance to secure your Internet
connection.
3.
Follow the on-screen prompts to complete the
Dell SonicWALL Setup Wizard.
4.
A Setup Wizard Summary page displays at the end of the
wizard. Verify the information you've entered is correct,
then click Apply.
5.
Once completed, a Setup Wizard Completion notice
displays.
6.
Click Close.
7.
Continue to
Connecting to the Internet, page 18
the appliance for Internet access and then refer to
Registering, Licensing, and Upgrading, page 23
the registration process.
18
| Connecting to the Internet
Connecting to the Internet
After initial setup is complete, connect the LAN and WAN
interfaces for access to external networks or the Internet. You
cannot reach the Internet or other WAN destinations while
connected to the MGMT interface.
For Internet access, configure your management computer with
one of the following:
• Obtain an IP address automatically using DHCP
• A static IP address on the default LAN subnet
(10.10.10.0/24)
• A static IP address on the configured LAN subnet if you
changed it during initial setup
Note: Internet connectivity is needed for the recommended
product registration process.
Connecting the LAN Port
1.
Connect one end of an Ethernet cable to your computer or
to your local network switch or other networking device.
2.
Connect the other end of the Ethernet cable to the X0
(LAN) port on your SuperMassive appliance.
to connect
to begin
Advertisement
Table of Contents
