Deployment Scenarios; Selecting A Deployment Scenario; Configuring A Stateful Ha Pair Configuring L2 Bridge Mode - Dell NSA E5500 Getting Started Manual

In this Section:
This section provides detailed overviews of advanced deployment scenarios as well as configuration instructions for connecting your Dell
SonicWALL NSA E5500.
•

Selecting a Deployment Scenario

• Scenario A: NAT/Route Mode Gateway
• Scenario B: State Sync Pair in NAT/Route Mode
• Scenario C: L2 Bridge Mode
• Initial Setup - page 29
• Configuring a Stateful HA Pair
• Configuring L2 Bridge Mode
Tip: Before completing this section, fill out the information in
Provider (ISP) Information, on page 9. You will need to enter this information during the Setup Wizard.
- page 25
- page 26
- page 27
- page 28
- page 37
- page 43

Deployment Scenarios

Obtain Configuration Information, on page 8 and
3
Obtain Internet Service
24