General Operation; Standby/On; Select Modes; Adjust The Volume - Horizon Fitness ACUSTIC HAV-M7700 Operating Instructions Manual

Hide thumbs

Table of Contents

Available languages

- If the DISC/USB source is selected, but no DISC is placed or no USB connected, the system switches to the

BUZZER automatically.

- The FM tuner timer will show the last tuned station.

• Activate and Deactivate the Alarm Timer

- Press the TIMER button on the remote control to view the alarm settings or activate the alarm.

• Stop Alarm Ring

- When the alarm rings, press the

settings remain.

Standby/ON

When you first connect the main unit to the mains socket, the main unit will be in Standby mode.

• Press the

button on the remote control or on main unit to switch the main unit ON.

• Press the

button on the remote control or on main unit to switch the main unit back to Standby mode.

Tips:

- When turning the system on, the system will continue in the mode it was in when it was turned off last time.

- Disconnect the mains plug from the mains socket if you want to switch the unit off completely.

- If there is no signal input under the CD, USB, ANALOG IN, BT (Bluetooth) mode, the unit will automatically

switch off within 15 minutes.

Select Modes

Press the

button on the unit or the CD, USB, FM, ANALOG, BT buttons on the remote control to select the

desired mode. The selected mode will show on the display.

Adjust the Volume

Press the VOL +/– buttons on the remote control or on the unit to adjust the volume.

If you wish to turn the sound off, press the

press VOL+/- button on the remote control or on the unit to resume normal volume.

Select the Equaliser

Press the EQ button on the remote control or on the unit repeatedly to select:

[Pop] - [Classic] - [Jazz] - [Rock] - [Flat]

Adjust the Brightness

Press the DIMMER button on the remote control to select brightness level.

Set the Sleep Timer

This unit can switch to standby automatically after a set period of time.

1. Press the TIMER/SLEEP button on the remote control repeatedly to select your desired number of minutes.

The number of minutes shown will display in this sequence:

SLEEP 120

SLEEP 90

2. Stop pressing the SLEEP button when your desired number of minutes is displayed. The sleep timer is now

set.

Press the SLEEP button to view the remaining time before switch off.

To cancel the sleep timer, press the SLEEP button repeatedly until "SLEEP 00" shows on the display.

button on the remote control or on the unit. The alarm stops but the alarm