Set The Clock; Set The Alarm Timer - Horizon Fitness ACUSTIC HAV-M7700 Operating Instructions Manual

Synchronization of Clock
When in STANDBY mode, press and hold the
Press the buttons on the remote control or on the unit to switch the clock synchronization modes:
- RDS Only synchronize with the RDS radio station.
- OFF Turn off the clock synchronization function, only adjust the clock manually.
Then press the button on the unit or the
Manual Setting the clock
- Manual Setting the clock can only be done in STANDBY mode.
1. In STANDBY mode, press and hold the CLOCK button on the remote control
until the hour digits are flashing.
- Press the button on the unit or the
control to select 12/24-hour format.
2. Press the buttons on the remote control or on the unit to adjust the hour digits while flashing, then
press CLOCK button on the remote control to confirm, then the minute digits will flash.
3. Press the buttons on the remote control or on the unit to adjust the minute digits while flashing, then
press the CLOCK button on the remote control to confirm.
- Each activated state will be cleared if any buttons are not pressed within 15 seconds.
Time Display
When in ON mode, press the CLOCK button to show the current time on the display for few seconds.
- The clock must be correctly set for the timer to operate correctly.
1. In STANDBY mode, press and hold the TIMER button on the remote control until the hour digits flash on the
display.
2. Press the , buttons on the remote control to adjust the hour digits, and then press the TIMER button on
the remote control to confirm, the minute digits will flash on the display.
3. Press the , buttons on the remote control to adjust the minute digits, and then press the TIMER button
on the remote control to confirm, the mode will flash on the display.
4. Press the , buttons on the remote control to select:
• BUZZER (to wake to a buzzer sound)
• DISC (to wake to your DISC music)
• USB (to wake to your USB music)
• FM (to wake to your selected FM Radio Station)
Press the TIMER button on the remote control to confirm, the display will show the volume level.
5. Press the , buttons on the remote control to adjust the volume, and then press the TIMER button on the
remote control to confirm, and setup the TIMER ON validity.
6. Press the , buttons on the remote control to select the validity of TIMER ON.
SET OFF: Disable TIMER ON settings.
SET ON: Enable TIMER ON settings, unit will turn on every day at assigned time.
Tips:
- Each enabled state will be cleared if a button is not pressed within 15 seconds.

Set the Clock

/MENU button on the remote control to synchronise the clock.
on the remote control to confirm.
button on the remote

Set the alarm Timer

26