Prepare the Remote Control
The provided Remote Control allows the unit to be operated from a distance.
Even if the Remote Control is operated within the effective range 6m, remote control operation may be
impossible if there are any obstacles between the unit and the remote control.
If the Remote Control is operated near other products which generate infrared rays, or if other remote
control devices using infrared rays are used near the unit, it may operate incorrectly. Conversely, the other
products may operate incorrectly.
First-time use
The unit has a pre-installed lithium CR2025 battery. Remove the protective tab to activate the remote control
battery.
Replace the Remote Control Battery
1. Push the tab on the side of the battery tray towards the tray (A).
2. Now slide the battery tray out of the remote control (B).
3. Remove the old battery.
4. Place a new CR2025 battery into the battery tray with the correct
polarity (+/-) as indicated.
5. Slide the battery tray back into the slot in the remote control.
Precautions Concerning Batteries
When the Remote Control is not to be used for a long time (more
than a month), remove the battery from the Remote Control to
prevent it from leaking.
If the batteries leak, wipe away the leakage inside the battery
compartment and replace the batteries with new ones.
Do not use any batteries other than those specified.
Do not heat or disassemble batteries. Never throw them in fire or
water.
Do not carry or store batteries with other metallic objects. Doing so
could cause batteries to short circuit, leak or explode.
Never recharge a battery unless it is confirmed to be a rechargeable
type.
Preparations
24