Bluetooth Operation; Pair Bluetooth-Enabled Devices - Horizon Fitness ACUSTIC HAV-M7700 Operating Instructions Manual

Hide thumbs

Table of Contents

Available languages

You can listen to music from a Bluetooth-enabled device via this player.

Note:

The operational range between this player and a Bluetooth device is approximately 8 meters (without any

object between the Bluetooth device and the unit).

Before you connect a Bluetooth device to this unit, ensure you know the device's capabilities.

Compatibility with all Bluetooth devices is not guaranteed.

Any obstacle between this unit and a Bluetooth device can reduce the operational range.

If the signal strength is weak, your Bluetooth receiver may disconnect, but it will re-enter pairing mode

automatically.

Pair Bluetooth-enabled Devices

1. Press the

button on the unit or the BT button on the remote control to select BT (Bluetooth) mode. "NO

BT" will show on the display if the unit is not paired to any Bluetooth device.

2. Activate your Bluetooth device and select the search mode. "HAV-M7700" will appear on your Bluetooth

device.

If you cannot find the unit, press and hold the "

on the unit to be searchable. The display will show "PAIRING" and you will hear "Pairing" from the unit.

3. Select "HAV-M7700" in the pairing list. On successful pairing, you will hear "Paired" from the unit, and the

display panel shows "BT".

4. Play music from the connected device.

To disconnect the Bluetooth function, you can:

Switch to another function on the unit.

Disable the function from your Bluetooth device. The Bluetooth device will be disconnected from the

soundbar after the "Disconnected" voice prompt.

Press and hold the

Tips:

Enter "0000" for the password if necessary.

If a connection exist, press and hold the "

unit to re-activate the pairing mode, the connection will be interrupted.

If no other Bluetooth device pairs with this player within two minutes, the player will recover its previous

connection.

The player will also be disconnected when your device is moved beyond the operational range.

If you want to reconnect your device to this player, place it within the operational range.

If the device is moved beyond the operational range, when it is brought back, please check if the device is

still connected to the player.

If they are connected, display panel shows "BT".

If the connection is lost, display panel shows "NO BT". Follow the instruction above to pair your device to the

player again.

Listen to Music from Bluetooth Device

If the connected Bluetooth device supports Advanced Audio Distribution Profile (A2DP), you can listen to the

music stored on the device through the player.