Connections; Connect To Speakers; Connect External Audio Devices; Connect The Fm Aerial - Horizon Fitness ACUSTIC HAV-M7700 Operating Instructions Manual

Connect to Speakers

Note:
- For optimal sound, use the supplied speakers only.
- Connect only speakers with impedance that is the same or
higher than the supplied speakers. Refer to the Specifications
section of this manual.
1. Loosen the left / right speakers connector.
2. Use the speaker cable (included) to connect the speaker port on
the left/right speaker.
- Red harness cable connect to the "+" (red connector) terminal
- Black harness cable connect to "-" (black connector) terminal
3. Screw the red (+) / black (-) connector to secure the cable.
4. Connect the speakers to the SPEAKER OUT (R/L) sockets on the
rear of the main unit.

Connect external audio devices

ANALOG Socket
A. Use a RCA to RCA audio cable (not included) to connect the TV's
audio output sockets to the ANALOG (R L) socket on the unit.
B. Use a RCA to 3.5 mm audio cable (included) to connect the
audio player's headphone socket to the ANALOG (R L) socket on
the unit.

Connect the FM Aerial

- Connect the supplied FM wire antenna to the ANT. socket on the
unit. Then position the aerial to obtain optimum reception.
- You may need to adjust the position of the FM aerial when tuning
the radio to receive the strongest signal.
• Never leave the aerial where it can be pulled by young children.

Connect Power

Risk of product damage!
- Ensure that the power supply voltage corresponds to the voltage
printed on the back or the underside of the unit.
• Connect the power to the AC~ socket on the unit and a wall
outlet.
Note:
- Ensure all connections are connected before connecting to the
mains power socket.
- Be sure to unplug the power cord from the outlet when the
system is not in use for an extended period of time.
25

Connections