Connect to Speakers
Note:
-
For optimal sound, use the supplied speakers only.
-
Connect only speakers with impedance that is the same or higher
than the supplied speakers. Refer to the Specifications section of
this manual.
Connect the speaker cords between the terminals as shown below.
Use the OPTICAL Socket
-
Connect an OPTICAL cable (not included) to the TV's OPTICAL OUT socket and the OPTICAL socket on the
unit.
Use the COAXIAL Socket
-
You also can use the COAXIAL (not included) cable to connect the TV's COAXIAL OUT socket and COAXIAL
socket on the unit.
Tip: While in OPTICAL/COAXIAL mode, if there's no sound output from the unit and the status indicator flashes
quickly, you may need to activate PCM Signal output on your source device (eg. TV, DVD or Blu-ray player).
17
Connections