Advertisement
Quick Links
QuickShifter easy
Supplementary Manual
Yamaha YZF-R125 2008-2013 (iQSE-1 + QSH-P2T)
Secure the bike on a stand.
Remove the seats.
Remove the black plastic covers below
the fuel tank.
Remove the fuel tank cover and remove
the fuel tank.
Remove the bellypan.
Locate the ignition coil connectors under
the fuel tank.
Take off the Red/White terminal from
the coil.
Connect the Red/White terminal to the
QSH Red wire terminal.
Connect the QSH Green terminal to this
coil terminal.
w w w . h e a l t e c h - e l e c t r o n i c s . c o m
1/3
Advertisement
Related Manuals for HealTech Electronics QuickShifter easy
Summary of Contents for HealTech Electronics QuickShifter easy
- Page 1 QuickShifter easy Supplementary Manual Yamaha YZF-R125 2008-2013 (iQSE-1 + QSH-P2T) Secure the bike on a stand. Remove the seats. Remove the black plastic covers below the fuel tank. Remove the fuel tank cover and remove the fuel tank. Remove the bellypan.
- Page 2 QuickShifter easy Supplementary Manual Yamaha YZF-R125 2008-2013 (iQSE-1 + QSH-P2T) Splice the QSH White wire to the Orange wire of the coil by using the supplied red wire tap connector. Isolate the unused QSH Green wire terminal with tape. Connect the QSH Black wire terminal to the battery negative terminal.
- Page 3 Supplementary Manual Yamaha YZF-R125 2008-2013 (iQSE-1 + QSH-P2T) Typical position for the QuickShifter easy. Secure the unit properly. w w w . h e a l t e c h - e l e c t r o n i c s . c o m...