Blaupunkt WS50WH APP Owner's Manual page 11

Important notes:
a.Both weather station and your smart phone should connect and work under same Wi-Fi
network.
b.In case you take smart phone outside, the weather station can connect and work with
your Wi-Fi network alone.
c.In case changed Wi-Fi network or wi-fi password, you have to repair the weather station
with your smart phone. You can delete the device from Tuya app first, then repair and add
it from app base on above paragraph introducing of this manual.
d.In case weather forecast information lost or incomplete on display, please try to open
Tuya smart app, fresh and reconnect device.
e.You can rename the device name by tap below pencil icon on the app.
Other settings
Week language: short and repeat press the setup button on side panel to switch the week
language(7 types)
Backlight brightness: in AC/DC power adaptor mode, short press the top
snooze/backlight/network button to adjust the backlight brightness between
high/middle/low level. In battery power mode, Short press top snooze/backlight/network
button can make the display light on and off after 10 seconds.
Low battery indicator: when the battery symbol shows next the outdoor temperature
which means low battery power in outdoor wireless transmitter; when the battery symbol
shows next to indoor temperature which means low battery power for main unit if you use
battery power. Please replace it with fresh batteries.( This product work with APP, it will
check and download data from internet frequently, highly recommend to use the product
connect with AC/DC power adaptor.)
Temperature and humidity
1. Indoor temperature range: -10 ~+50 ℃ / 14 ~122 ℉.
2. Outdoor temperature range: -40°C~60°C(-40°F~140°F) .
Remarks: LL.L℃ or HH.H℃ will show on display when out of the above range
3. Indoor and outdoor humidity range: 1%-99%
LL% or HH% will display when out of range
4. Temperature accuracy: ±1,0℃ between 0℃~ +50℃/ 32℉~104℉.
±1,5℃ outside this measuring range
5. Humidity accuracy: (40-70%) ± 5%, others ±8%
Indoor comfort level
Humidity lower than 40%, and Temperature between 20℃ and
27℃;
Humidity data between 40%-70%, and temperature higher than
20℃
Humidity lower than 70%, Temperature lower than 20℃ or
higher than 27℃
9