Epson Stylus Pro 4880 User Manual page 261

LOWER INK LEVERS
LOWER L INK LVR
LOWER R INK LVR
TOP COVER OPEN
LOAD PAPER
SET PAPER LEVER
RELEASE LEVER
REMOVE PAPER
JAM
NO MNT TNK
REAR COVER
OPEN
UPDATE FAILED
UNLOCK PRINT
HEAD
Both ink levers have
been raised.
The ink lever on the left
ink compartment has
been raised.
The ink lever on the right
ink compartment has
been raised.
Top cover is open.
The paper lever is in the
released position.
Paper lever is in the
released position.
Paper is jammed in the
printer.
The maintenance tank is
not set in the printer.
The rear cover is open.
The printer failed to
update the firmware.
Print head is locked.
Lower the ink levers.
Lower the ink lever on
the left ink
compartment.
Lower the ink lever on
the right ink
compartment.
Close the top cover.
Move the paper lever
to the secured position.
Move the paper lever
to the secured position.
Release the paper lever
first. Then, open the top
cover if necessary and
remove the jammed
paper. If TURN PRINTER
PWR OFF AND THEN ON
appears on the LCD
panel, turn the printer
off, leave it for a while,
and then turn it on
again. See "Clearing
paper jams" on page
276.
Install the maintenance
tank.
Close the rear cover.
Update the firmware
again.
Pull the green tab on
the left side of the print
head to release the
print head.
Problem Solver
261