Epson Stylus Pro 4880 User Manual page 258

DRIVER INK SET
SETTING IS WRONG
MISMATCH ERROR
Note:
These messages
are displayed on
the LCD panel
alternately.
LOAD ROLL PAPER
LOAD SHEET PAPER
IN P. TRAY
FEED SHEET PAPER
FORBIDDEN MEDIA
FROM P. TRAY
The cartridge option of
the printer driver has not
been changed yet.
Non-Epson genuine ink
cartridge is installed.
The roll paper is not set
correctly.
The cut sheet media is
not set correctly in the
paper tray.
The cut sheet media
needs to be loaded
manually.
Cut sheet media, which
is to be loaded from the
front or rear manual feed
slot, is being loaded from
the paper tray.
Stop printing, and then
press and hold the
Pause button for 3
seconds. Finally, select
the correct ink
cartridge in the printer
driver according to the
actual ink cartridge set
on the printer. See
"Updating the printer
driver information" on
page 238. If you want to
continue printing, press
the Pause button.
Press the Pause button
for 3 seconds to cancel
printing. If you want to
continue printing, press
the Pause button.
Load the roll paper
correctly, and select
Roll Auto Cut On
Roll Auto Cut Off
See "Loading roll
paper" on page 199.
Set the cut sheet media
in the paper tray
correctly, and select
Sheet . See "Loading
cut-sheet media" on
page 207.
Load the cut sheet
media.
Remove the cut sheet
media from the paper
tray, and load it from
the proper paper feed
slot. See "Checking the
paper path" on page
206.
Problem Solver
or
.
258