Epson Stylus Pro 4880 User Manual page 184

6. Press the Menu
press the Paper Feed
NARROW, STANDARD, WIDE, or WIDER.
7. Press the Menu
setting, and THICKNESS PAT appears on the LCD panel.
8. Press the Menu
test printing pattern.
Paper thickness test pattern example:
1 2 3 4
9. Examine the printed pattern to determine which set of lines
are aligned (showing the smallest gap), and note the
corresponding number.
10. After the pattern is printed, THICKNESS NUM appears. Press the
Paper Feed
noted in step 9.
11. Press the Menu
12. CUT METHOD appears. Press the Paper Feed
button to select STANDARD, THICK, SLOW, THICK, FAST, or
THIN PAPER, and then press the Menu
13. PPR FEED ADJ appears. Press the Paper Feed
Feed button to set the paper feed amount, and then press
the Menu
14. EJECT ROLLER appears. Select AUTO, SHEET, ROLL CURLED, or
ROLL NORMAL, and then press the Menu
button to display PLATEN GAP, and then
or Paper Feed
button to save the selected platen gap
button again to print the paper thickness
5 6 7 8 9
smallest gap
or Paper Feed
button to save the selected value.
button.
10 11 12 13
button to select the number
button.
The Control Panel
button to select
14 15 16
or Paper Feed
or Paper
button.
184