Epson Stylus Pro 4880 User Manual page 11

❏ If you use an extension cord with this product, make sure the
total ampere rating of the devices plugged into the extension
cord does not exceed the cord's ampere rating. Also, make
sure the total ampere rating of all devices plugged into the
wall outlet does not exceed the wall outlet's ampere rating.
❏ Do not attempt to service this product yourself.
❏ Unplug this product and refer servicing to qualified service
personnel under the following conditions:
The power cord or plug is damaged; liquid has entered the
product; the product has been dropped or the cabinet
damaged; the product does not operate normally or exhibits
a distinct change in performance.
❏ If you plan to use the printer in Germany, observe the
following:
To provide adequate short-circuit protection and
over-current protection for this printer, the building
installation must be protected by a 10 or 16 amp circuit
breaker.
❏ If damage occurs to the plug, replace the cord set or consult a
qualified electrician. If there are fuses in the plug, make sure
you replace them with fuses of the correct size and rating.
Safety Instructions
11