Ordering For Accessories - ABB Relion 650 Series Product Manual

Transformer protection RET650
Version 2.2

22. Ordering for Accessories

Accessories
Test switch
The test system COMBITEST intended for use with the
IEDs is described in 1MRK 512 001-BEN and 1MRK
001024-CA. Please refer to the website:
www.hitachiabb-powergrids.com/protection-control
detailed information.
Protection cover
Protective cover for rear side of RHGS6, 6U, 1/4 x 19"
Protective cover for rear side of terminal, 6U, 1/2 x 19"
Combiflex
Key switch for settings
Key switch for lock-out of settings via LHMI
Note: To connect the key switch, leads with 10 A Combiflex socket on one end must be used.
Mounting kit
Side-by-side mounting kit
Configuration and monitoring tools
Front connection cable between LHMI and PC
LED Label special paper A4, 1 pc
LED Label special paper Letter, 1 pc
Manuals
Note: One (1) IED Connect USB flash drive containing user documentation (Operation manual, Technical
manual, Installation manual, Commissioning manual, Application manual and Getting started guide),
Connectivity packages and LED label template is always included for each IED.
Specify additional quantity of IED Connect USB flash drive requested.
Hitachi Power Grids
Test switches type RTXP 24 is ordered separately. Please
refer to Section
corresponding documents.
RHGS 6 Case or RHGS 12 Case with mounted RTXP 24
IP15151-1 v1
and the on/off switch for DC-supply are ordered separately.
SEMOD111888-5 v14
Please refer to Section
corresponding documents.
for
SEMOD130267-5 v8
M15042-3 v5
SEMOD131414-4 v4
© 2017 - 2021 Hitachi Power Grids. All rights reserved
1MRK 504 172-BEN G
Related documents for references to
Related documents
Quantity:
Quantity:
Quantity:
Quantity:
Quantity:
Quantity:
Quantity:
Quantity:
for references to
M15040-3 v8
1MRK 002 420-AE
1MRK 002 420-AC
IP15161-1 v1
SEMOD130356-4 v7
1MRK 000 611-A
1MRK 002 420-Z
IP15162-1 v2
1MRK 001 665-CA
1MRK 002 038-CA
1MRK 002 038-DA
M15161-3 v17
1MRK 003 500-AB
107