FLOS WIRERING Manual page 21

REV. 1
DATE 19/08/2021
WIRERING F9512030 EN
RF3320100
PLUG KIT + DRIVER SPARE PART
Fig.1
Insert the plug into the driver unit by using the guides snap it inside its
apposite slot (use the correct type of plug for area in which the device
must be installed), connect the plug to the feeder unit locking it in by
rotating it 90° clockwise.
WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.
For the installation of the spare-part, it is necessary to consult a qualified electrician.
©2021 Flos - All rights reserved - www.flos.com
21
Flos reserves the right to introduce any changes to its own models, without prior notice.