The Optional Product Is Not Available; The Remaining Service Life Of The Toner Cartridge Is Not Updated (For Windows Users Only); Printout Problems; The Font Cannot Be Printed - Epson AcuLaser M2300D series User Manual

The optional product is not available

Cause
The printer does not recognize the optional product.
For Windows users, EPSON Status Monitor is not
installed.
For Macintosh users, you do not re-register the printer.
The remaining service life of the toner cartridge is not updated (For Windows
users only)
Cause
The interval between updating information for the
consumables is too long.

Printout Problems

The font cannot be printed

Cause
For Windows users, you may use the printer fonts
substituted for specified TrueType fonts.
The selected font is not supported by your printer.
Epson AcuLaser M2300/M2310/M2400/M2410 Series
What to do
Print a status sheet to see if the printer recognizes the optional
product. If not, reinstall the optional product.
For Windows users:
You have to install EPSON Status Monitor, or make settings
manually in the printer driver. See "Making Optional Settings" on
page 117.
For Macintosh users:
When you have attached or removed options from the printer,
you need to start EPSON Status Monitor, or delete and re-register
the printer.
To delete the printer, use Print & Fax (for Mac OS X 10.5 or later) or
Printer Setup Utility (for Mac OS X 10.4).
What to do
Press the Get Information Now button on the Consumables Info
Settings dialog box. You can also change the interval for updating
information about the consumables on the Consumables Info
Settings dialog box.
What to do
In the printer driver, choose the Print TrueType fonts as bitmap
check box in the Extended Settings dialog box.
Make sure that you have installed the correct font. See the Font
Guide for more information.
User's Guide
Troubleshooting 95