Epson AcuLaser M2300D series User Manual page 57

Printing an overlaid document
You can select the registered form data from the Paper Source drop-down list on the Basic Settings tab.
For registering form data in the Paper Source, see step 8 in "Creating an overlay" on page 55.
If overlay form data is not registered in the Paper Source or if you want to make detailed settings,
follow the steps below.
1. Open the file to print with overlay data.
2. From the application, access the printer driver. For details, see "Accessing the printer driver" on
page 116.
3. Click the Advanced Layout tab.
4. Select the Form Overlay check box.
5. Select the Overlay Print check box, then click More Settings. The Form Selection dialog box
appears.
6. Make appropriate settings. For details about each setting, see online help.
7. Click OK in the Form Selection dialog box.
8. Click OK in the Advanced Layout tab.
9. Click OK (For Windows 2000, click Print).
Saving an overlaid form pre-settings
This function allows you to save the settings you made from "Printing an overlaid document" on page
57.
1. From the Form Selection dialog box, click Save/Delete. To open the dialog box, see "Printing an
overlaid document" on page 57.
2. Type the pre-settings name in the Form Pre-Settings Name box, then click Save. Your
pre-settings name will appear in the Form Pre-Settings drop-down list in the Form Selection
dialog box.
3. Click OK. Your pre-settings name will appear in the Pre-Settings drop-down list in the Advanced
Layout dialog box.
Epson AcuLaser M2300/M2310/M2400/M2410 Series User's Guide
Printing Tasks 57