Troubleshooting; Error Indication - Panasonic YC-400TX4 Operating Instructions Manual

10 Troubleshooting

● To ensure safety, troubleshooting work shall be done by qualifiedpersonnel.
● Make sure to turn off the power and other switches of all
before taking any actions for correcting anerror.
*: Includes this product, the distribution box and other related devices (jigs, robots, etc.).
● In case of performing the inside inspection, make sure to work at least five minutes after
the power is turned off (for capacitordischarge).

10.1 Error indication

■ When a self-diagnosable erroroccurs,"Err"(forerror)anderrorcodecanbedisplayedonthe operationpanel.
See thefollowing table ford etailsoftheerrorcodes.
■
(Note)About"Group"inthetable
● Group"A":ItisnotnecessarytoturnpowerswitchOFF.(Thedisplaysareautomaticallyturned off when the cause isremoved.)
● Group"B": ItisnecessarytoturnpowerswitchOFFandbackONagain.(ThedisplayscanNOT
beautomaticallyturnedoffuntilthepowerswitchisturnedOFFevenwhenthecauseisremoved.)
Err S/N Error type
Err 001 emergency stop
secondary over-
Err 002 current
error
temperature rise
Err 003
error
Touching the current-carrying parts may cause a fatal electric shock
orburn injury.
To prevent a physical accident, such as an electric shock, burn injury, etc., make sure to
observe the followings.
Group
The connection of external equipment emergency stop on the output terminal
block.
TurnpowerswitchOFF,refertothelistbelowand
B
removethecauseandthenturnpowerswitchONagain.
malfunctionfromexternalequipmentemergencystop.
malfunctionfromswitchpowersourcePCBinthisequipment.
Over-current due to short-circuit in the secondary circuit or so on.
TurnweldinggunswitchOFFandremovethecauseofthe over current.
A
Rise in temperature inside this welding power source. Please do NOT turn OFF
the machine before the temperature in the Product decreases.
<Remedy>
Keeptheinputpowerinnoloadstateandwaitfora while. The error code indication
automatically turned off when the power source is cooleddown.
Check and remove causes of over-heat.
A
Over dutycycle,
Airflowblockingatventilationandcoolingfan windows
Iftheproblemcannotbesolvedbytheabove-mentioned
activities, please clean the cooling fan.
devices*
Probable causes and remedy
25
for safety reasons