Table of Contents
Advertisement
SAFETY PRECAUTIONS
The safety precautions in this instruction should be strictly followed in order to prevent injury to users or
damage properties.
The following symbols differentiate the levels of danger or injury that may result if the product is
not used correctly as instructed.
WARNING
Denotes a hazard that could result in death or
serious injury.
The following symbols are used to indicate the type of instructions that need to be followed.
(The symbols given below are examples)
This symbol indicates an action that must
not be performed.
Do not pull the power cord when
carrying or storing the product.
(Otherwise, the power cord may be
damaged, causing fire or electric shocks .)
Do not damage the power cord or
power plug.
Do not cut, modify, twist, squeeze the power
cord, place it near heat sources or place any
heavy weight on it, etc.
(Otherwise, the power cord may be
damaged, causing fire or electric shocks .)
Do not connect electricity other than
the rated voltage (220V
(Otherwise, the power cord may be
overheat, causing fire.)
Do not clean the product with acid
detergents or detergents that contain
chlorine.
(Toxic gases given off by the detergent
may be harmful to your health.)
Do not place your fingers or metal
objects into the air inlet or air outlet.
(Otherwise, you may be hurt by the inner
units, causing electric shocks or injury.)
Do not touch the power
plug with wet hands.
(Otherwise, electric shocks
may occur.)
Do not let the product get wet.
(Otherwise, the product may
short circuit, causing fire or
electric shocks .)
Do not disassemble or modify this
product.
(Otherwise, the product may malfunction,
causing fire or electric shocks.)
Contact the dealer for repair.
Denotes a hazard that could result in minor injury
or damage to property.
WARNING
50Hz).
~
Please strictly follow
CAUTION
This symbol indicates an action that must
be performed.
In case of any abnormality or fault,
please stop using the product
immediately and disconnect the power .
(Otherwise, electric shocks, fire or smoke
may occur.)
< Examples of abnormality/Fault >
The product stops running when the power
cord is moved.
If any switches does not work.
If the circuit breaker is tripped or a fuse blows.
If the power cord or power plug become
abnormally hot.
If you notice a burning smell or an abnormal
sound or vibration.
If there is any other abnormalities or fault.
Please stop using the product immediately
and disconnect the power, and contact the
dealer to check and repair.
Clean the power plug regularly.
(If dust is found on the power plug, humidity
may cause damage to insulation, causing fire.)
Disconnect the power and wipe it with
a dry cloth. When the product has not been
used for long period, disconnect the power.
Be sure to disconnect the power before
cleaning the product.
(Otherwise, the product may self-start operate
suddenly, causing electric shocks or injury .)
Insert the power plug securely.
(If the power plug is not inserted securely,
electric shocks or fire may occur due to
short circuit.)
Do not use damaged power plugs or loosen
power sockets.
If the supply power cord is damaged, it
must be replaced by the manufacturer,
its service agent or similarly qualified
persons in order to avoid a hazard.
(Otherwise, electric shock or fire may occur.)
Advertisement
Table of Contents
