Page 1
www.jbctools.com INSTRUCTION MANUAL Nitrogen Regulator Module for DI Control Unit...
Page 2
This manual corresponds to the following reference: MN-A Packing List The following items are included: Nitrogen Regulator Module Module Cable Manual ......1 unit ........... 1 unit Connector ...... 1 unit Ref. 0031026 Ref. 0026830 Connection Nitrogen Regulator Module Nitrogen Generator...
Page 3
Description The MN is an electrovalve controlled by the soldering station that allows you to solder with nitrogen with a minimum gas consumption. Once the MN (Nitrogen Regulator Module) has been connected to the Control Unit, enter into the Station Settings menu and switch on the Nitrogen Mode.
Page 4
- Ambient operating temperature: 10 - 40 ºC (50 - 104 ºF) Complies with CE standards. ESD Safe. Warranty JBC’s 2 year warranty covers this equipment against all manufacturing defects, including the replacement of defective parts and labour. Warranty does not cover product wear or misuse.