Related Manuals for Coredy R Pro Series
Summary of Contents for Coredy R Pro Series
- Page 1 Robot Vacuum Cleaner Robot aspirador R Pro Series User's Manual Manual del usuario...
- Page 2 Coredy Robot Series Model User's Manual App Installa�on Guide Warranty Card R750-W Pro R750 Pro R752 Pro R754 Pro R756 Pro R Pro Series R758 Pro R650 Pro R652 Pro R654 Pro R656 Pro R380 R400 R580 R Series R580-W...
-
Page 3: Table Of Contents
3. Using Your Coredy Robot ..............................3.1 Important Tips Before Use ............................... 3.2 Ge�ng Started ................................. 3.3 Use Your Coredy Robot with the Coredy Robot App ......................3.4 Start/ Stop Cleaning ................................. 3.5 Select a Cleaning Mode ..............................3.6 Select Cleaning Preference ............................... - Page 4 5. Troubleshoo�ng ................................. 6. Wi-Fi Connec�on ................................7. Specifica�ons ..................................Thank you for purchasing Coredy robot vacuum cleaner, please carefully read all instruc�ons before using this product, and keep this user manual for future reference.
-
Page 5: Important Safety Informa�On
Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. The robot must be used in accordance with the direc�ons of this Instruc�on Manual. Coredy Inc cannot be held liable or responsible for any damages or injuries caused by improper use. -
Page 6: Ba�Ery And Charging
Do not operate the robot in areas with exposed electrical outlets in the floor. 1.2 Ba�ery and Charging Use only rechargeable ba�ery packs with the correct specifica�on approved by Coredy. To use a standard outlet for charging only,. Product may not be used with any type of power converter. The Use of other power converters will immediately void the warranty. - Page 7 Before every use, check the ba�ery pack for any sign of damage or leakage. Do not charge damaged or leaking ba�ery packs. If the ba�ery pack is leaking, contact Coredy Customer Service for disposal. The ba�ery pack must be removed from the robot before disposal.
-
Page 8: About Your Coredy Robot
Press and hold for 3 seconds to turn on or off Press to start Auto cleaning Press to pause the current cleaning when working Press to return Coredy Robot to the charging dock Press again to pause Press and hold for 3 seconds to ac�ve Wi-Fi paring or reset... - Page 9 a. Top Faceplate Recharge Bu�on Power Bu�on Wi-Fi Status Light Dust Bin/Water Tank Bumper Release Bu�on Reset b. Bo�om Cliff Sensors Charging Contacts Universal Wheel Side Brushes Ba�ery Compartment Driving Wheels Rolling Brush Rolling Brush Guard 2-IN-1 Dust Bin/Water Tank...
- Page 10 c. 2-IN-1 Dust Bin/Water Tank Dust Bin Water Inlet Cover Water Inlet Water Tank Mopping Module (washable mopping cloth a�ached) Primary Filter Sponge HEPA Filter...
- Page 11 d. Charging Dock Status Light Power Socket Charging Contact Pins e. Remote Control Screen Display Auto Cleaning Cleaning Modes Op�on Start/Pause Bu�on Direc�on Bu�ons Clock Setup Bu�on Scheduling Bu�on Recharge Bu�on *Install 2 AAA ba�eries (included in the package) before using the remote control for the first �me.
-
Page 12: Accessories
2.2 Accessories Charging Dock Power Adapter Cleaning Brush 2-IN-1 Side Brushes Extra Filter Dust Bin/Water Tank Mopping Module Extra Mopping Cloth Remote Control (with Mopping Cloth) (With 2 x AAA Ba�eries) -
Page 13: Led Indica�On
2.3 LED Indica�on Power Light Status Status Solid blue Standby / Cleaning / Fully charged Flashing blue Pause Solid blue & Solid purple Low power and returning to charging dock Solid blue & Breathing blue Charging (ba�ery power ≥ 20%) Solid blue &... -
Page 14: Using Your Coredy Robot
3. USING YOUR COREDY ROBOT 3.1 Important Tips Before Use Before using this device, pick up the objects sca�ering on the floor, including but not limited clothes and important papers, curtains, cords. If the room to be cleaned contains a balcony that a physical barrier should be used to prevent access to the... -
Page 15: Ge�Ng Started
3. Install the mopping module if mopping is needed, skip this step if mopping is not needed. 2. Install Side Brushes to the bo�om of Coredy robot by pressing a brush into each slot un�l it clicks. 4. Place the Charging Dock on a hard level surface and... - Page 16 - 1.5 meters (5 feet) in the front of the Charging Dock. - 0.5 meter (1.6 feet) on both sides of the Charging Dock. 7. Place Coredy robot on the charging dock by lining up the metal charging contacts. Note: Make sure the device is fully charged before use.
-
Page 17: Use Your Coredy Robot With The Coredy Robot App
3.3 Use Your Coredy Robot with the Coredy Robot App To enjoy all available features, it is recommended to control your Robot via the Coredy Robot App. Scan the QR code as below to download the latest version of App or download from the App Store (iOS devices) or Google Play (Android devices). - Page 18 1. Create a User Account 1. Open the Coredy Robot 2. Click "Agree." 3. Create your Coredy account. app and create an user account.
- Page 19 4. Enter the verifica�on code. 5. Set your password to 6. To provide be�er services, you can allow the following 6~20 characters, and click permissions (or not) for the App, then click "Go to App." "Done."...
- Page 20 2. Add Device 7. Enable the Coredy App to send no�fica�ons, then click 1. Click "Add Device" or tap "Con�nue." "+" in the upper right corner.
- Page 21 2. Enable Coredy App to get your loca�on and use your 3. Add your Coredy robot to Bluetooth. your Coredy account.
- Page 22 Then, a�er successfully connec�ng to the hotspot, as you use as usual. Enter the Wi-Fi Bu�on for 3 manually switch to the Coredy Robot App. your Wi-Fi password, and seconds. You'll hear a voice Click "Next" to connect.
- Page 23 4. Wait for the connec�on 5. Your device is added 6. Wait 1-2 seconds for the progress to reach 100% successfully. Click "Done" Robot to be ready. Now you can control your robot via the App.
- Page 24 Wi-Fi status light will slowly flash blue, then you can follow the Wi-Fi instruc�ons in the Slowly flashing blue Wai�ng for Wi-Fi connec�on Coredy Robot App to set up the Wi-Fi connec�on. Solid blue Wi-Fi connected...
-
Page 25: Start/ Stop Cleaning
3.4 Start/ Stop Cleaning Note: Install 2 AAA ba�eries (included in the package) 1. Press and hold on bu�on to wake up the robot. before using the remote control. 2. Press bu�on to start cleaning in auto cleaning mode. Robot will automa�cally returns to charging dock 3. - Page 26 Random Cleaning Mode Spot Cleaning Mode Select Random cleaning in Coredy Robot App, or press Select Spot cleaning in Coredy Robot App, or press on remote control to choose. remote control to choose. Ideal for intensively cleans one single room. Select this In this mode, robot intensively cleans a specific area for 2...
-
Page 27: Select Cleaning Preference
Edge Cleaning Mode 3.6 Select a Cleaning Preference Select Edge cleaning in Coredy Robot App, or press In the Coredy Robot App, select a cleaning preference on remote control to choose. according to your needs, also can select to close vacuum In this mode, robot cleans along walls and furniture legs suc�on or mopping level according to your needs:... -
Page 28: Select Boost-Intellect Feature
1) Schedule cleaning from Coredy Robot App (Boost-Intellect) feature on/off according to your needs. It With the Coredy Robot App, you can schedule the robot to will automa�cally increase suc�on power when a carpet is start cleaning at any par�cular �me from Sunday to detected. - Page 29 a. Set the remote control’s clock And then press the bu�on, the robot will have a voice prompt when the clock se�ng completed. Press bu�on on remote control, then the hour sec�on begins to flash in the clock display se�ng b.
- Page 30 c. Cancel the cleaning schedule Press and hold bu�on approx. 4 seconds on remote control, the robot will have a voice prompt when the cleaning schedule cancel completely. Press bu�on to select the desired figures. Press the bu�on to select the minute or hour sec�on.
-
Page 31: Manual Control
3.9 Manual Control 1) Open the water inlet cover to fill the water, then You can direct Coredy robot to clean a par�cular area close the cover. by using the Manual Control feature in the Coredy Robot App, or direc�on bu�ons on the remote control. - Page 32 3) Install the mopping module into the bo�om of 2-in-1 5) Select a suc�on power and mopping water level to dust bin/water tank un�l a click is heard. start cleaning. 6) When the robot finishes cleaning working and returns to the charging base, press release bu�on to remove the 2-in-1 dust bin/water tank.
-
Page 33: Use Your Coredy Robot With Self-Empty Sta�On
3.11 Use Your Coredy Robot with 2) Place the Self-Empty Sta�on on a hard-level surface and against a wall, and make sure it is in an open and Self-Empty Sta�on* unclu�ered area. This robot works with a standard charging dock and can work with a self-empty sta�on, a simple choice that... - Page 34 4) Insert the Dedicated 2-IN-1 Dust Bin/Water Tank into Note: your robot. The "Dust Collec�on" feature is ON by default. 5) Charge the Robot, and start to use it with Self-Empty Sta�on. When the Robot completes the cleaning cycle, or the ba�ery gets low, Robot returns to the Self-empty Sta�on to automa�cally collect dust and dirt from the Robot and recharge itself.
-
Page 35: Use Your Coredy Robot With Amazon Alexa/ Google Assistant
“Alexa, turn on Coredy R750 Pro” Assistant “Alexa, turn off Coredy R750 Pro” 6.If you add two or more Robot devices to Coredy Robot App, you can edit name for each Coredy robot Using Amazon Alexa on Coredy App or Alexa, they're Synchronous. A�er named, giving a command by using your robot name. - Page 36 (Note: Only supports above commands currently.) away from walls or other objects that may cause 5. If you add two or more Robot devices to Coredy interference (such as microwave ovens). Robot App, you can edit name for each Coredy robot on Coredy App or Google Assistant, they're Synchro- nous.
-
Page 37: Reset The Robot
3.13 Reset the Robot You can reset the Robot if there is no response when pressing any bu�on on the robot. Reset Use a clip (or sim card pin) to press the Reset bu�on . The Robot will automa�cally turn off. Press and hold the Power bu�on to turn it on. -
Page 38: Care And Maintenance
A�er each use Every 12 months Cliff Sensors Charging Contacts Once Per week Universal Wheel Driving Wheels Note: Coredy manufactures various replacement parts and assemblies. If you think you need a replacement part, please contact Coredy Customer Care for more informa�on. -
Page 39: Emptying 2-In-1 Dust Bin/Water Tank
4.1 Emptying 2-IN-1 Dust Bin/ Water Tank 3) Remove the filter. 1) Press the release bu�on to pull the 2-in-1 dust bin/water tank out. 2) Open and empty the dust bin, empty the remaining water from the water tank if have. 4) Shake off... -
Page 40: Washing The Mopping Module And Mopping Cloth
4.2 Washing the Mopping Module 5) Wash the dust bin thoroughly with water. and Mopping Cloth It is recommended to clean the washable mopping cloth and water tank a�er each use. 1) A�er each use, remove the mopping cloth from the water tank. -
Page 41: Cleaning The Side Brushes
4.3 Cleaning the Side Brushes 4.4 Cleaning the Cliff Sensors, Bumper and Charging Contacts 1) Remove the side brushes. 1) Wipe Robot’s Cliff Sensors, with a clean, dry cloth. 2) Wipe the charging contact pins on Robot and the 2) Clean the brush and the brush stand, and reinstall the Charging Dock with a clean, dry cloth. -
Page 42: Cleaning The Rolling Brush
3) Wipe the bumper with a clean, dry cloth. 2) Li� the rolling brush to remove. 4.5 Cleaning the Rolling Brush 1) Pull on the release tabs to unlock the brush guard. 3) Clean the rolling brush with the cleaning tool provided. -
Page 43: Ba�Ery And Charging Informa�On
4.6 Ba�ery and Charging 4) Reinstall the rolling brush by inser�ng the fixed Informa�on protruding end first and then clicking into place. Lithium Ion Ba�ery Important: Lithium ion ba�eries and products that contain lithium ion ba�eries are subject to stringent transporta�on regula�ons. - Page 44 Contact your local waste management authority for ba�ery recycling and disposal regula�ons in your area. Ba�ery Replacement You can visit Coredy’s website h�p://shop.coredy.com to purchase the ba�ery or other accessories for the robot. Ba�ery Removal Follow these instruc�ons to remove and reinstall robot’s ba�ery:...
- Page 45 Move the robot to a new posi�on and try Le�/Right wheel abnormal Wheel may be stuck or trapped. again. - If the issue persists, contact Coredy custom- er support for help. Tap it repeatedly to remove any Bumper stuck Bumper is stuck Dust, move the robot to a new posi�on and...
- Page 46 Side brush abnormal Side brush may be stuck - Clear the side brush. - If the issue persists, contact Coredy custom- er support for help. - Clear any obstacles in the surrounding area and try again. Robot stuck, please restart The robot may be stuck or - Move robot to a flat surface and new...
- Page 47 - You are using a 2.4GHz router or a dual-band router that is configured to support a 2.4GHz frequency band. Coredy Robot does not support 5GHz frequency band.If the robot cannot connect to the Wi-Fi network and you are using a 2.4/5GHz mixed network, switch to a 2.4GHz network for Wi-Fi setup.
- Page 48 - A future so�ware release will support access to channels above 11 for users outside North America. Un�l then, use channels 1-11. If you cannot control Coredy robot with your smartphone, please contact the Coredy Service Center for help. 7. SPECIFICATIONS...
- Page 49 CONTACT US | CONTÁCTANOS support@coredytech.com h�p://shop.coredy.com (US) +1-800-999-8470 Mon-Sun, 06:00 - 02:00 (PST) (DE) +49 800 000 9581 Mon-Sun, 15:00 - 11:00 (GMT+1) (UK) +44-808-134-9909 Mon-Sun, 14:00 - 10:00 (GMT) (AU) +61 39 917 5657 Mon-Sun, 01:00 - 21:00 (AEDT) @CoredyOfficial...
Need help?
Do you have a question about the R Pro Series and is the answer not in the manual?
Questions and answers
R400 not beeping. Side brush error showing.
The Coredy R Pro Series R400 may not be beeping and showing a side brush error because the side brush is stuck in an unknown object. The solution is to clear the side brush of any obstructions. If the issue persists, contact Coredy customer support for further assistance.
This answer is automatically generated