Table of Contents
Advertisement
SHARPER IMAGE
CUSTOM MASSAGE
MANUAL PROGRAMS
Select Manual Program from Home display, press up or down button to
navigate among: Mode, Position, Speed, and Width.
MASSAGE MODE
Navigate to Mode, press right button, then use the up or down button
to select your desired mode: 360° Knead, Clockwise Knead, Counter-
Clockwise Knead, Upper Knead, Lower Knead, Tap, Knead&Tap,
Shiatsu, and Knock. Press OK button to select mode.
MASSAGE POSITION
Navigate to Position, press right button, then use the up or down button
to select your desired massage position: Full, Upper, Lower, Partial, and
Spot. Press OK button to select position.
Full travels the entire length of the massage track.
Upper travels from the neck down to lumbar.
Lower travels along the lumbar and glutes.
Partial travels a few inches above and below the current position.
Spot stops the massage mechanism in current position.
Partial and Point location can be fine tuned from
the in use screen. Use the left or right button to
navigate to massage position. Press OK to select.
Once in the massage position menu screen, use
the up or down buttons to move the massage
mechanism up or down along your back. Holding
the up or down button will cause the mechanism to
move faster. Press OK to confirm changes.
R
24
Manual Mode
Advertisement
Table of Contents
