Move Methods; Connect To Power - Sharper Image AXIS 4D User Manual

MOVE METHODS

- Apply pressure to the back of the massage chair from behind to pivot on the Castors. Have a
second person up front to guide the Footrest until in the correct position. Maintain clearances
as mentioned above. Gently lower into place. Do not pull on the side arms.
- Do not move the chair when there is a user inside.
- To carry this product, do not lift by the footrest or armrest, hold the chassis and steady the backrest (have 4 or
CAUTION
more people to carry the product).

CONNECT TO POWER

Plug into a 110V grounded outlet.
GROUNDING INSTRUCTIONS
To avoid risk of electrical shock, turn power switch off before plugging unit into electrical outlet. Use only with
properly grounded outlet (3 prong). Do not plug into ungrounded outlet.
WARNING
WARNING
– Improper connection of the equipment-
grounding conductor can result in a risk of electric shock. Check with
a qualified electrician or serviceman if you are in doubt as to whether
the product is properly grounded. Do not modify the plug provided
with the product – if it will not fit the outlet, have a proper outlet
installed by a qualified electrician.
This product is for use on a nominal 120-V circuit and has a grounding
plug that looks like the plug illustrated. Make sure that the product is
connected to an outlet having the same configuration as the plug. No
adapter should be used with this product.
Earthing
This massage chair is a Class 1 electrical appliance. Make sure to
use a grounded outlet to the grounded power supply circuit and a
properly installed earth grounding rod with ground connection, to
avoid electric shock.
Grounding pin
7
Grounded
outlet