Truefit™ Body Scanning; Re-Adjust Shoulder Position; Getting Out Of The Chair - Sharper Image AXIS 4D User Manual

TRUEFIT™ BODY SCANNING
Select any auto program and press the OK button.
The chair will automatically begin scanning your
body, mapping your back, shoulders, and neck.
During this process it is important to remain seated
back into the chair without lifting your head.
The scan can be viewed on the remote control
screen. If fine tuning is needed just after your body
scan, wait for the shoulder adjust prompt to appear
and then use the Back Adjustment buttons to move
the massage rollers up or down for the perfect
shoulder kneading position.

RE-ADJUST SHOULDER POSITION

If you find that you need to adjust your shoulder
height position after leaving the shoulder adjust
screen, simply use the left and right arrows when
in the in-use screen to navigate to shoulder position.
Press OK to select. Once selected you will be taken
back to the Shoulder adjust screen where you
can use the up and down arrows to fine tune your
shoulder position.

GETTING OUT OF THE CHAIR

To easily exit the chair at any time, press the ON/OFF power button on the remote control to
restore the chair to the upright position.
WARNING! Check to make sure children and pets are clear of chair before pressing on/off
button to return chair to upright position. See next page for detailed hazard warnings.
9