Table of Contents
Advertisement
Sterling-LWB STM Expansion Board
USER GUIDE
2. Sterling-LWB STM Expansion Board Description
The Sterling-LWB STM Expansion Board is designed for use with the ST Micro Discovery Board series.
Specifically, the expansion board CON1 and CON2 are intended to be used with the 32F411EDISCOVERY
board, and can be mated directly to its P1 and P2 headers.
Figure 1 Sterling-LWB STM Expansion Board
2.1 Sterling-LWB STM Expansion Board Hardware
The hardware components on the Sterling-LWB STM Expansion Board are shown in the block diagram
below. The expansion board routes pins from the STM32F4xx MCU to interface with the Sterling-LWB
module. In addition, the Expansion Board includes SPI Flash and a USB/JTAG debugger.
Figure 2 Sterling-LWB STM Expansion Board Block Diagram
The information in this document is subject to change without notice.
330-0234-R1.2
Page 4 of 25
Copyright ©2016-2017 LSR
Advertisement
Table of Contents
