3.2.3 Installing the Cypress WICED Studio and WICED SDK
To install WICED Studio and WICED SDK, extract and run the WICED-Studio-x.x.x.x-IDE-Installer.exe file
from the downloaded archive. Choose a location to install WICED Studio and follow the remaining
instructions in the installer to select a location for the WICED SDK files.
3.2.4 Adding the Sterling-LWB Platform to your WICED Installation
The WICED SDK ships with many platforms already configured in the "43xxx_Wi-Fi/platforms" folder.
Each subfolder provides the configuration and interface code for a particular target platform (Wi-Fi
Module + Processor + Development board).
For the Sterling-LWB STM Expansion Board, you will need to download the
WICED Board
file from the Sterling-LWB website. Expand the archive and copy the
"LSRSTERLING_00950" into the "43xxx_Wi-Fi/platforms" folder within your WICED SDK installation
before attempting to build and download code. See the
section on the LSR website for the latest platform configuration files.
3.2.5 Using the Cypress WICED Studio
Start by launching the WICED Studio from its installed location from the previous step.
On the first run, you will see a README.txt file presented with some general information about the
installed SDK release. Please read this file for details on what the installed release of the WICED Studio
provides.
The information in this document is subject to change without notice.
330-0234-R1.2
Software Downloads for Sterling-LWB WICED
Figure 5 WICED Studio loading splash dialog
Figure 6 WICED Studio main window
Copyright ©2016-2017 LSR
Sterling-LWB STM Expansion Board
USER GUIDE
Sterling-LWB Config Files
Page 10 of 25