Advertisement
INTERCHANGEABLE FOCUSING SCREENS
The OM System interchangeable focusing screens
provide you with the ultimate in focusing versa-
tility. Optional screens are available to suit virtual-
ly every picture-taking situation. The focusing
screens come with a special tool. To remove the
focusing screen:
a) Detach the camera lens from the camera body.
b) Use the special tool provided to push up on
the release catch underneath the top ledge of
the mirror box (see the photo above). This
allows the screen and screen frame to drop
down.
c) Remove the screen from inside the camera by
gripping the tip of the screen with the tool as
shown.
CAUTION: Although the above procedure can be
done with fingers, it is recommended that you
use the special tool supplied. Changing focusing
screens is a procedure to be exercised with great
care. Trying to change a screen with your fingers
can result in fingerprints and costly damage to
the surface of the screen, the prism, or the mirror.
Should this occur, cleaning or repair MUST be
handled by an authorized service center. Such
damage is not covered by the product warranty.
d) To install the screen, fit it into the frame and
push the frame upward gently until it clicks
into place. Gently shake the camera body to
make sure the screen is held securely in place.
28
Hide quick links:
Advertisement
