Instruction Of Control Panel - coldline ICE80 User Manual

Commercial undercounter air cooled ice maker
Table of Contents

Advertisement

Instruction of Control Panel

1. LED Display:
Self-check: Display "ini" code.
Preparing: Counting secondspositively.
Ice making: Counting seconds positively
prior the water reaching 0 degree C.
Counting seconds down to 0 s after.
Ice Harvest: Counting seconds positively.
Clean: Display "CLE" during cleaning and
sterilizing;Display "rin" during rinsing.
2. LED Lamps: Lights on during the related
process.
3. Ice cube thickness adjustment: If you are
not satisfied with the ice thickness,
process this below operation after the
water
flows
evaporator: Press the Ice cube "–" button
for 3 seconds, then click the button "+" or
"-" on the panel to adjust the thickness of
ice cube.
Note: By clicking the "+" or "-" button
one time, the ice making time is extended
or shortened by 1.5 minutes.
4. Cleaning: During the normal operation,
hold the cleaning button for 3 seconds to
enter the cleaning process. During the
entire cleaning process, cleaning agents
and disinfectants need to be put into the
water trough. When the clean process is
finished, the ice maker will go to ice
making process.
5. Switch: When the device is powered, click
the "Switch" button to switch OFF/ON the
device.
6. Voice function (only for machines with
voice function): The machine with voice
smoothly
through
USRESTAURANT® RESERVES THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE
announcement prompts will provide voice
prompts for related operations.
7. Please open and close the storage bin door
gently. Do not slam the door. After taken the
ice cubes, please close the door.
8. If the ice maker is not in use for a long
time, it should be energized and run for 2
to 4 hours every 2 months.
Other special protection - shutdown
If the ice machine has not detected ice
cube falling off in three cycles, it will shut
down for safety protection. The ice maker
needs to be checked.
The ice machine detects that the ambient
the
temperature is too high and will stop for
safety protection.
If the water-cooled ice machine detects
an abnormity in water supply, it will stop
for safety protection.
7

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ice120Ice180Ice280

Table of Contents