About Playback; Playingback - Olympus LS-10 Instructions Manual

Playingback

The recorder can playback WAV, MP3 and WMA
format files. To playback a file recorded with
other machines, you need to transfer (copy) it
from a computer.
2 3 button
`/OK button
1
Select the folder which contains the
files to be played back (☞ P.16 to
P.18).
How to change folders:
1 Pressing the LIST button at the file display
while stopped will return you to the next
higher level. Pressing the LIST button
repeatedly will bring you to the folder list
display.
2 Pressing button 2 or 3 at the folder list
display will select the folders for voice
recordings and press the 9 button.
2
In the File list display, press the 2 or 3
button to select the file that you want
to playback.
• In the File display, press the 9 or 0
button to select a file.
3
Press the `/OK button to start play-
back.
• [ ] will appear on the display.
a Folder name/ File name/ File format/
Current file number/ Total number of
recorded files in the folder
b File length
c Elapsed playingback time
d Level meter

About Playback

a
b
c
d
4
Set it to a comfortable listening vol-
ume by using the VOLUME dial.
5
Press the STOP 4 or `/OK button at
any point you want to stop the play-
back.
•
•
•
The volume can be
adjusted within a range
from [0] to [10]. The
larger the number on
the dial is the higher the
volume will be
[ ] will go out on the display.
This will stop the file being played back
midway. When the resume function is
activated the stopped location will be
registered, even if the power is turned
off. The next time the power is turned
on, playback may be resumed from the
registered stopped location.
When the batteries are removed from the
recorder the resume function's stopped
position will be erased.
3
27