Normal Condition - Honeywell MA Series Operation Manual

MAx panel Fire Detection System

1.5.2 Normal condition

The following screen is displayed when the control panel is in normal condition.
If you tap on the screen, the following screen is displayed.
1
2 3
4

Date - time

Alarm zones counter
 Pre-alarm zones counter
 Fault zones counter
 System faults counter

Disabled zones counter

Virtual zone LED - zonal indication:
Green = OK
Red = FIRE
Yellow = FAULT

Function associated with PGRM key input of the program menu
 Function associated with DISABLE key input of the disable menu
 Function associated with TEST key input of the test menu
Function associated with UTIL key input of the utility menu
11
Icons that indicate the panel conditions
 The icon appears if there are no alarms or faults.
 If there are pre-alarms the alarm clock icon is displayed.
 If there are alarms the fire icon is displayed.
 If there are faults this icon is displayed.
The alarm state overrides all other event types if both alarms and faults are present.
10
8
10
5 6
Dark Blue = TEST
Light Blue = Disablement
9
11
37
7
 refer to Programming menu
 refer to Disable menu
 refer to Test menu
 refer to Utility menu
M-167.3-Serie-MA-EN / 11.2021