Stand-By Condition - Honeywell Notifier AM12-24 Manual

Stand-by condition


The following screen is visualized when the control panel is in stand-by condition.
Icon for the indication of the control panel status. Without alarm and troubles the NOTIFIER logo is visualized.
With Disabled points/zone an exclamation marks report them(!).
With Alarms the symbol of a Flame is visualized and the backlit of display become red.
With Troubles the symbol of a Triangle is visualized .
Note: The alarm status override any other indication .
Date - Hour
Function associated to the key F1.
In this case the pressure of the Key F1 allow the
entry in the programming menù.
See paragraph description of the operation of
the keyboard for data entry.
See programming menù
AM-1224
AM-1224_manu
Zone Fault System Faults
Counter Counter
Function associated to the key F2.
In this case the pressure of the Key
F2 allow the entry in the Utility
menù. See paragraph description of
the operation of the keyboard for
data entry.
See utility menù.
Installation and programming manual
Doc. M-124.1-AM1224-ENG Rev A.1
Zone excluded
Counter
Function associated to the key F4. In this
case the pressure of the Key F4 allow the
entry in the Test menù. See paragraph
description of the operation of the keyboard
for data entry.
See test menù.
Function associated to the key F3. In this case
the pressure of the Key F3 allow the entry in the
Exclusion menù. See paragraph description of
the operation of the keyboard for data entry.
See exclusion menù.
PAGINA - 15
NOTIFIER ITALIA