Table of Contents
Advertisement
MCO-V700, MMD-V700
Opening and Closing the Front Panel
The front panel can be opened for various settings or for servicing.
When opening and closing the front panel, take the following
precautions.
Warning
÷ Open the panel after confirming that there are not any objects in
front of or on top of the front panel. Failure to check for the
presence of objects may result in damage to this product.
÷ Insert only the key provided with this unit into the key hole. Other
objects may cause a malfunction.
÷ Do not rest your hands or objects on the front panel after it has
been opened.
÷ When closing the front panel, take care not to pinch your fingers
or other objects in between the front panel and the main unit.
÷ Disconnect all wired mics.
÷ When the Stereo mixing amplifier (SA-V350II or SA-V300II) is on
top of the main unit, sometimes the mixer legs are positioned so
the front panel cannot be opened. First move the amp slightly
towards the back (about 2 cm) and then open the front panel.
126
Opening the Front Panel
1 Insert the key (included with the MCO-V700) into the key hole.
2 Turn the key to the left (counter clockwise). Without turning the
key back to the right, open the panel towards yourself.
Closing the Front Panel
Push the upper corners of the front panel and close panel
completely.
\
Advertisement
Table of Contents
