Advantech ARK-7060 User Manual page 64

USB Configuration
– XHCI Compliance Mode
Options to enable Compliance Mode. Default is to disable Compliance Mode.
Change to enabled for Compliance Mode testing.
– xDCI Support
Enable/Disable xDCI (USB OTG Device).
– USB Overcurrent
Select 'Disabled' for pin-based debug. If pin-based debug is enabled but USB
overcurrent is not disabled, USB DbC does not work.
– USB Overcurrent Lock
Select 'Enabled' if Overcurrent functionality is used. Enabling this will make
xHCI controller consume the Overcurrent mapping data.
– USB2 PHY Sus Well Power Gating
Select 'Enabled' to enable SUS Well PG for USB2 PHY. This option has no
effect on PCH-H.
– XHCI Wake On Usb Enable
Enables/Disables support for XHCI Wake on USB on connect/disconnect.
ARK-7060 User Manual 52