Status; Actions; Status Information - VSCOM ModGate Plus User Manual

5 Configuration

5.1.1. Status

The type of ModGate Plus is shown as the Model Name. For identification the Serial Number
and MAC-Address are also given. Since such an address must be unique for all devices on the
world, this is suitable to check if the configuration starts on the correct device. And last the
Firmware Version is presented. The button Check for new Version allows you to check
whether a new firmware is available. See

5.1.2. Actions

These Actions are required later, so they will be referenced in below sections. Here is only basic
information.
• Reboot Device
This will restart the complete ModGate Plus, thus cancelling all current operations and
connections.
• Restart application
The application is the Gateway part of the software being restarted.
• Download configuration file
The file is shown in a separate browser window. The download is performed by just saving
the 'page'. For service requests it is useful to send this saved configuration.
• View logfile
The log displays the operations performed recently. It is also shown in a separate window,
and can be saved in the same way as the configuration. Also useful for service requests.
June 2018
Figure 9: Status information
5.4 for details.
Figure 10: Possible Actions
ModGate Plus User Manual 20