Advertisement
2. Recommended Installation Position
2-1 Examples of correct camera installation
• Recommended Installation height : 3.25ft
1. Decide the camera installation position.
2. Clean the camera installation surface.
Using a commercially available cleaner, wipe dirt, moisture and oil away from the
surface on which the camera is to be attached.
3. Mount the camera on the license plate.
4. Fix the camera temporarily with screw.
5. Complete all of the required connections.
6. Display the camera video.
Some video monitors may switch automatically to the external video input function.
For details, read the instruction manual for your video monitor.
7. Change the shift lever to the R (Reverse) range to view the image of the rear of the
vehicle.
Before viewing the camera, apply the parking brake and chock the wheels so that the
vehicle will not move. Otherwise, an unexpected accident may result.
8. Adjust the camera angle so that the rear part of the vehicle or the rear bumper is
visible at the bottom of the monitor screen.
When adjusting the camera angle, be careful not to stretch the camera cord.
9. After adjusting the camera angle, tighten the retaining screws firmly.
Inspect the retaining screws at times. If they are loose, tighten them firmly.
10.Perform the operations in "Camera Setting".
If an adjustment is not possible in the currently available range, change the camera
position before retrying.
11.Fix the camera firmly in position.
6
Installation position
2. Recommended Installation Position
2-2 Installing the Switch Unit
1. Clean the switch unit installation surface.
Using a commercially available cleaner, wipe dirt, moisture and oil away from the
surface on which the switch unit is to be attached.
2. Attach double-side adhesive tape on the bottom of the switch unit and then attach
it in an easy-to-operate position, for example near the dashboard on the driver seat
side.
7
Advertisement
