Names Of Parts; Memory Gauge; Battery Check - Olympus CAMEDIA C-720 Ultra Zoom Basic Manual

NAMES OF PARTS

Viewfinder/Monitor indications — Memory gauge & battery check
En

Memory gauge

The memory gauge lights when you take a picture. When the gauge is lit, the
camera is storing a picture on the SmartMedia card. The memory gauge
indication changes as shown below depending on the shooting status. When
the memory gauge is full, wait until the light goes out before you take any
more shots.
When taking still pictures
Before shooting
(Gauge is off)
When recording movies
Before shooting
(Gauge is off)

Battery check

If the remaining battery power is low, the battery check indication changes as
follows when the camera is turned on or while the camera is in use.
Lights.
(green)
Remaining power
level: high
10
Shoot.
Wait.
One picture
taken
(Lit)
If you continue shooting
Shoot.
Wait.
During shooting (Gauge lit).
● Shooting is not possible until the light goes out completely.
● Movie recording finishes automatically when the memory
gauge is fully lit.
Remaining power level:
low. Replace with a new
battery.
Shoot.
Wait.
Lights.
(red)
Shoot.
Wait.
No more pictures
can be taken
(Fully Lit)
No indication
Remaining power level:
exhausted. BATTERY
EMPTY is displayed.
Replace with a new battery.