Advertisement
Notices
- Do not submerge the product in water or allow water to enter the
intake of the probe.
- Do not expose the product to temperatures exceeding 60°C.
- Do not leave the product in direct sunlight for long periods of time.
- Do not dismantle or attempt repairs of the product without authorisation.
- Do not change or replace the included lithium battery.
- Do not leave for more than 6 months without charging the battery to
prevent damage.
- Do not use on objects with a charge or appliances connected to a power
source.
- Ensure the filter is present and clean before performing a test.
- Ensure there is enough power before performing a test.
- Use only the supplied charging cable.
- Avoid the inhalation of refrigerant vapor. High concentrations are harmful
and may lead to coma or death.
Technical Specifications
https://aprvtiotech.com/
sales@aprvtiotech.com
Video Instruction
+1 713 701 1986
ALD-200 REFRIGERANT
LEAK DETECTOR
https://aprvtiotech.com/
sales@aprvtiotech.com
H
CO
HC
R1234YF
2
2
PEAK
WARM UP
SEN:
L
GAS/RSET
PEAK
ON/OFF
SENS
MUTE
+1 713 701 1986
Advertisement
Table of Contents
Related Manuals for APRVTIO ALD-200
Summary of Contents for APRVTIO ALD-200
- Page 1 Notices - Do not submerge the product in water or allow water to enter the ALD-200 REFRIGERANT intake of the probe. - Do not expose the product to temperatures exceeding 60°C. - Do not leave the product in direct sunlight for long periods of time.
- Page 2 The ALD-200 has an ergonomic design and a large LCD - Slowly move probe ( approx 3 inch/sec ) - Detection: when a leak is detected, the screen for easy viewing.
Need help?
Do you have a question about the ALD-200 and is the answer not in the manual?
Questions and answers