APRVTIO WJL-6000 PRO Quick Start Manual

Refrigerant leak detector

Hide thumbs Also See for WJL-6000 PRO:

https://aprvtiotech.com/

sales@aprvtiotech.com

REFRIGERANT LEAK DETECTOR

+1 713 701 1986

https://aprvtiotech.com/

WJL-6000 PRO

INSTRUCTIONS

WJL-6000Pro

Install 4 Pieces"AAA"

alkline battery and press the

" " button to turn on.

6 seconds warm up time.

USE"+"or "-" button

to adjust 5 levels sensitivity.

USE"reset" button to

calibrate and continue

searching until the leak is

pinpointed.

sales@aprvtiotech.com

+1 713 701 1986

Table of Contents

Need help?

Do you have a question about the WJL-6000 PRO and is the answer not in the manual?

Page 1 WJL-6000 PRO REFRIGERANT LEAK DETECTOR INSTRUCTIONS WJL-6000Pro Install 4 Pieces”AAA” alkline battery and press the “ ” button to turn on. 6 seconds warm up time. USE”+”or “-” button to adjust 5 levels sensitivity. USE”reset” button to calibrate and continue searching until the leak is pinpointed.
Page 2 Thank you for purchasing the WJL-6000 Pro. Incorporated Setup with advanced leak detect technology the WJL-6000 Pro is an easy to use and compact halogen leak detector. Structure: 1. Sensing tip 2. Flexible probe ② INSTRUCTIONS INSTRUCTIONS INSTRUCTIONS WJL-6000Pro WJL-6000Pro 3.
Page 3 Notices Q1: Why does the Refrigerant Gas Leak Detector beep continuously - Do not submerge the product in water. after it is turned on? Can it be turned off? - Do not expose the product to temperatures exceeding 60°C. A: After the leak detector is turned on, it will beep slowly and - Do not leave the product in direct sunlight for long periods of continuously, which proves that it is operating normally and time.